Fiber Optic Application Demonstrator Demonstrating Light/Image/Sound Transmission

Size: Panel length 462 * width 41 * total height 221mmMaterial: metal panel, electronic accessories, etcWeight: Approximately 2.45kg/setPurpose: For demonstrating light/image/sound transmission experiments1. Transmitting light: Insert one end of a curved organic glass rod into the light source's through-hole, and place a piece of white paper in front of the other end to see the light passing from one end of the organic glass to the other. If a regular glass rod is used, the same experimental results can also be obtained.2. Image transmission: Insert the letter board into the slit of the light hole, insert the fiber bundle into the light hole, and stick the letter board to the other end of the fiber bundle to see the transmitted letter image3. Sound transmission: Turn on the power switches of the transmitter and receiver, insert the two ends of the fiber optic bundle into the left output hole and the other end into the input hole. At this point, the left speaker stops making a mocking sound, and the right speaker receives the signal and makes a sound.During use, it is necessary to strictly avoid inserting hair on both ends of the fiber bundle to prevent the fiber bundle end face and other optical components from coming into with grease. If there is dust accumulation, it can be blown away with a balloonThe optical fiber bundle used in this instrument is made of plastic optical fibers, and high temperatures should be avoided during use and storage. The duration of a demonstration should not be too long.

• 1. Transmitting light: Insert one end of a curved organic glass rod into the light source's through-hole, and place a piece of white paper in front of the other end to see the light passing from one end of the organic glass to the other. If a regular glass rod is used, the same experimental results can also be obtained.
• 2. Image transmission: Insert the letter board into the slit of the light hole, insert the fiber bundle into the light hole, and stick the letter board to the other end of the fiber bundle to see the transmitted letter image
• 3. Sound transmission: Turn on the power switches of the transmitter and receiver, insert the two ends of the fiber optic bundle into the left output hole and the other end into the input hole. At this point, the left speaker stops making a mocking sound, and the right speaker receives the signal and makes a sound.
• 4. During use, it is necessary to strictly avoid inserting hair on both ends of the fiber bundle to prevent the fiber bundle end face and other optical components from coming into with grease. If there is dust accumulation, it can be blown away with a balloon
• 5. The optical fiber bundle used in this instrument is made of plastic optical fibers, and high temperatures should be avoided during use and storage. The duration of a demonstration should not be too long.